Introduction This document describes how to restore a Cisco router to its original factory default settings. Prerequisites Requirements In order to perform the procedures described in this do...

Introduction In certain situations, it is desirable to restore the Catalyst switch configuration to the original default factory settings. This is useful when you want to remove an undesirable conf...

Performinstall allto upgrade the BIOS and also upgrade the NX-OS image to Release 7.x. Upgrade the Cisco NX-OS software using theinstall all nxos bootflash:filename[no-reload|non-disruptive|non...

Information About Software Images Cisco Nexus 3000 Series switches are shipped with the Cisco NX-OS software preinstalled on the switches. Before upgrading or downgrading from an existing image, ...

Chapter: Upgrading or Downgrading the Cisco Nexus 3000 Series NX-OS Software Chapter Contents Caution For the Cisco Nexus 3000 vPC topologies, an upgrade from Cisco NX-OS Release...

About MikroTik MikroTik is a Latvian company which was founded in 1996 to develop routers and wireless ISP systems. MikroTik now provides hardware and software for Internet connectivity in m...

cisco SWITCH, NETWORK SWITCH, POE SWITCH , CISCO POE SWITCH , CISCO 3850-48P-L, CISCO 3750X-48P-S, WS-C3750X-48P-S, C9300-48P-E SWITCH

How to upgrade Cisco IOS Image Lesson Contents TFTP FTP SCP R1 Configuration R2 Configuration MD5 Verification Boot System Conclusion Cisco IOS devices typically us...

CISCO NEXUS, CISCO N3K-C3064PQ-10GX, CISCO N3K-C3064PQ-10GE, CISCO N9K-C93180YC-EX, CISCO N9K-C93180YC-FX, CISCO SWITCH,