Model

S2700-26TP-SI-AC

Software and Hardware Attributes

Hardware

Product Line

Networking

Ports

24

Power Over Ethernet (PoE)

POE+

Condition

100% Original Brand

Device Type

Ethernet Switch

Forwarding performance

6.6 Mpps

Uplink Ports

2 x dual-purpose 10/100/1000 or SFP

MAC Address

8K MAC address entries

Switching Capacity

32 Gbit/s

Specifications

S2700-SI/S2710-SI

S2700-EI

S2750-EI/S2720-EI

Switching Capacity

32 Gbit/s

32 Gbit/s

S2750-EI: 64 Gbit/s
S2720-28TP-EI-AC: 12.8 Gbit/s

Forwarding Performance

S2700-9TP-SI-AC: 2.7Mpps
S2700-18TP-SI-AC: 5.4Mpps  

S2700-9TP-EI-AC：2.7Mpps
S2700-9TP-EI-DC：2.7Mpps S2700-9TP-PWR-EI：2.7Mpps
S2700-18TP-EI-AC：5.4Mpps
S2700-26TP-EI-AC：6.6Mpps
S2700-26TP-PWR-EI：6.6Mpps
S2700-52P-EI-AC：17.7Mpps

S2750-20TP-PWR-EI-AC：12.9Mpps

Port Descriptions

Downlink: 8/16/24/48 x 10/100 Base-TX Ethernet ports
Uplink: 2/4 x GE ports

Downlink: 8/16/24/48 x 10/100 Base-TX Ethernet ports
Uplink: 2/4 x GE ports

Downlink: 24 x 10/100 Base-TX Ethernet ports
Uplink: 4 x GE ports

MAC Address Table

8K MAC address entries
Manual deletion of dynamic MAC address entries
Configurable aging time of MAC addresses
Blackhole MAC address entries

8K MAC address entries
Manual deletion of dynamic MAC address entries
Configurable aging time of MAC addresses
MAC address learning control based on ports
Blackhole MAC address entries

16K MAC address entries
Manual deletion of dynamic MAC address entries
Configurable aging time of MAC addresses
MAC address learning control based on ports
Limit on the number of MAC addresses learned on a port
Blackhole MAC address entries

VLAN

4K active VLANs, complying with IEEE 802.1Q
Port-based VLAN assignment

4K active VLANs, complying with IEEE 802.1Q
Port-based VLAN assignment
MAC address-based assignment
Port-based QinQ

4K active VLANs, complying with IEEE 802.1Q
Port-based VLAN assignment
MAC address-based assignment
Port-based QinQ

QoS

Outbound port-based rate limiting
4 or 8 queues of different priorities on each port
Mapping between 802.1p priorities and queues
SP, WRR, and SP + WRR algorithms

Port-based rate limiting
4 or 8 queues of different priorities on each port
Mapping between 802.1p priorities and queues
SP, WRR, and SP + WRR algorithms

Port-based rate limiting
8 queues of different priorities on each port
Mapping between 802.1p priorities and queues
SP, WRR, and SP + WRR algorithms
Packet-based priority re-marking and packet redirection

IPv4 routing

Static routing
RIP v1/v2 (S2750-EI)

IPv6 Features

IPv6 protocol
Static IPv6 routes

IPv6 protocol
Static IPv6 routes
MLD v1/v2 snooping

IPv6 protocol
Static IPv6 routes
MLD v1/v2 snooping

Multicast

IGMP v1/v2/v3 snooping
Port-based rate limiting for multicast packets

MVLAN
Controllable multicast
IGMP v1/v2/v3 snooping
Port-based rate limiting for multicast packets

MVLAN
Controllable multicast
IGMP v1/v2/v3 snooping
Port-based rate limiting for multicast packets

Reliability

S2700-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w)
S2710-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s)

STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP ring topology and RRPP multi-instance

STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multi-instance SEP and ERPS (G.8032)
Smart Link tree topology and Smart Link multi-instance, implementing millisecond-level protective switch-over

Surge Protection

Surge protection capability of service ports: 7 kV

Surge protection capability of service ports: 7 kV

Surge protection capability of service ports: 7 kV

Security and Access Features

S2700-SI: Storm suppression
S2710-SI: Storm suppression, IP Source Guard
S2700-SI: Multiple authentication methods including AAA, RADIUS, and TACACS+;
Port isolation;
Suppression of multicast, broadcast, and unknown unicast packets;
CPU defense
S2710-SI: Multiple authentication methods including AAA, RADIUS, and TACACS+;
Port isolation;
Suppression of multicast, broadcast, and unknown unicast packets;
CPU defense;

802.1x authentication and limit on the number of users on an interface
Storm suppression
IP Source Guard
Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication
802.1x authentication, MAC address authentication, MAC bypass authentication
DHCP snooping
Port isolation and sticky MAC
Packet filtering based on MAC addresses
Limit on the number of learned MAC addresses
Suppression of multicast, broadcast, and unknown unicast packets
CPU defense
S2750-EI: DHCP relay

802.1x authentication and limit on the number of users on an interface
Storm suppression
IP Source Guard
Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication
802.1x authentication, MAC address authentication, MAC bypass authentication
DHCP snooping
Port isolation and sticky MAC
Packet filtering based on MAC addresses
Limit on the number of learned MAC addresses
Suppression of multicast, broadcast, and unknown unicast packets
CPU defense
S2750-EI/S2720-EI: DHCP relay

Power Consumption

S2700-9TP-SI < 12.8W
S2700-18TP-SI < 14.5W
S2700-26TP-SI < 15.5W
S2710-52P-SI < 38W

S2700-9TP-EI < 12.8W
S2700-9TP-PWR-EI < 154W (PoE: 124W)
S2700-18TP-EI < 14.5W
S2700-26TP-EI < 15.5W
S2700-52P-EI < 38W
S2700-26TP-PWR-EI < 808W (PoE: 740W)

S2750-20TP-PWR-EI < 435W
S2750-28TP-EI < 15.7W
S2750-28TP-PWR-EI < 445W
S2720-28TP-EI-AC < 15.7W

Interoperability

VLAN-based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST)
Link-type Negotiation Protocol (LNP) (similar to DTP)
VLAN Central Management Protocol (VCMP) (similar to VTP)