1

PD compatibility check button * PoE: The PD compatibility check function is disabled. The switch can supply power only to PDs that
comply with 802.3af and 802.3at.
* E-PoE: The PD compatibility check function is enabled. The switch can detect and supply power to
PDs that do not comply with 802.3af or 802.3at, as well as standard PDs that are detected as non-standard PDs because of the
external environment.

2

Sixteen PoE+ 10/100/1000BASE-T ports

3

Ground screw
NOTE: The minimum cross-sectional area of a ground cable is 18 AWG.

4

AC power socket NOTE: It is used with an AC power cable.

Item

Description

Dimensions (H x W x D)

* Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.40 in. x 8.66
in.)
* Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6
mm x 442.0 mm x 225.7 mm (1.72 in. x 17.40 in. x 8.89 in.)

Weight (including packaging)

3.79 kg (8.36 lb)

Service port surge protection

Common mode: ±7 kV

Power supply surge protection

±6 kV in differential mode, ±6 kV in common mode

PoE

Supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

Maximum voltage range

90 V AC to 264 V AC, 47 Hz to 63 Hz

Maximum power consumption (100% throughput)

* Without PoE: 15 W
* 100% PoE loads: 146 W (PoE: 124 W)

Typical power consumption (30% of traffic load)

14 W