1

Twenty-four 10GE SFP+ ports

Applicable modules and cables:

· GE optical module

· GE-CWDM optical module

· GE copper module (applicable in V200R001C01 and later versions, only 1000 Mbit/s supported)

· 10GE SFP+ optical module

· 10GE-CWDM optical module (applicable in V200R005C00 and later versions)

· 1 m and 3 m SFP+ high-speed copper cables

· 5 m SFP+ high-speed copper cables (applicable in V200R005C02)

· 10 m SFP+ high-speed copper cable (applicable in V200R001C00 and later versions)

· 3 m and 10 m AOC cables (applicable in V200R003C00 and later versions)

2

One ETH management port

3

One console port

4

One USB port

5

Ground screw

NOTE:

It is used with a ground cable.

6

ESD jack

NOTE:

Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.

7

Fan slot 2

NOTE:

Applicable fan module:

CX7E1FANA fan module

8

Fan slot 1

NOTE:

Applicable fan module:

CX7E1FANA fan module

9

Power module slot 2

NOTE:

· 500 W AC power module

· 500 W DC power module

10

Power module slot 1

NOTE:

· 500 W AC power module

· 500 W DC power module

Item

Description

Memory (RAM)

512 MB

Flash

64 MB

Power supply surge protection

· Using AC power modules: ±2 kV in differential mode, ±4 kV in common mode

· Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode

Dimensions (H x W x D)

43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)

Weight

· Empty: ≤ 5 kg (11.02 lb)

· Fully configured: ≤ 8.5 kg (18.74 lb)

Stack ports

Any 10GE SFP+ ports (a maximum of eight physical ports)

RPS

Not supported

PoE

Not supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

-48 V DC to -60 V DC

Maximum voltage range

90 V AC to 264 V AC, 47 Hz to 63 Hz

-38.4 V DC to -72 V DC

Maximum power consumption (100% throughput, full speed of fans)

153.6 W