1

Twelve 10/100/1000BASE-T ports

2

Four 1000BASE-X ports

Applicable modules:

· GE optical module

· GE-CWDM optical module

· GE-DWDM optical module

· GE copper module

· 10GE SFP+ optical module (only used for stack connection, a maximum transmission distance of 0.4 km, OSXD22N00 not supported, applicable in V200R019C10 and later versions)

· 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and later versions)

· 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions)

· 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)

3

One console port

4

One ETH management port

5

One USB port

6

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Ground screw

NOTE:

It is used with a ground cable.

8

Jack for AC power cable locking strap

NOTE:

The AC power cable locking strap is not delivered with the switch.

9

AC socket

NOTE:

It is used with an AC power cable.

-

-

Item

Description

Memory (RAM)

1 GB

Flash

512 MB in total. To view the available flash memory size, run the display version command.

Mean time between failures (MTBF)

98.6 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±7 kV

Power supply surge protection

±6 kV in differential mode, ±6 kV in common mode

Dimensions (H x W x D)

· Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.)

· Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Weight (with packaging)

3.83 kg (8.44 lb)

Stack ports

Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions)

RTC

Not supported

RPS

Not supported

PoE

Not supported

Rated voltage range

· AC input: 100 V AC to 240 V AC, 50/60 Hz

· High-Voltage DC input: 240 V DC

Maximum voltage range

· AC input: 90 V AC to 264 V AC, 47 Hz to 63 Hz

· High-Voltage DC input: 190 V DC to 290 V DC

Maximum power consumption (100% throughput)

29 W

Typical power consumption (30% of traffic load)

· Tested according to ATIS standard

· EEE enabled

· No PoE power consumption

23 W